
Sheet Metal Talk
General discussion for fabrication
and layout work. No advertising on forums, it will be deleted. 





12152016, 12:56 PM

Member


Join Date: Nov 2014
Posts: 49
Thanks: 11
Thanked 0 Times in 0 Posts


Quote:
Originally Posted by tinmetal
(1.1414 xoffset) 2 (.414x (clr) centre line radius this is the formula
example degree of elbow: 60=.577
45=.414
30=2.00
example in your situation
45 degree elbow 48x20=72, 48 + 24 half your check is 24=72 thats your centre line radius...
(1.414x36 offset)2(.414x72)
=50.9042(29.808)
=50.90429.616
=21.288 thats the length of the duct in between your on your two 45 degree elbow...
i hope this help you...

What about the total height of the fittings? Is there a formula for that?

12182016, 11:51 PM

Member


Join Date: Dec 2011
Location: midwest
Posts: 65
Thanks: 7
Thanked 12 Times in 9 Posts


finished total length of offset
Yes there is! The good news is, most of the work is already done once you've calculated the rise to the center of the elbows and the duct or pipe between them.
>Total length=sqr(hypotenuse^2offset^2)+ 2x (elbow 1/2 rise)
>the hypot. is slant side of the triangle all the way to the center of the angle,without subtracting 2x the rise. You will already have calculated this. sqr is square root
>the rise to the center of the elbows also will already have been calculated and,of course,the offset is known.
I hope this is clear and helps you.

The Following User Says Thank You to tinstructor For This Useful Post:


12192016, 12:40 AM

Member


Join Date: Nov 2014
Posts: 49
Thanks: 11
Thanked 0 Times in 0 Posts


Thanks very much, could you put this in a sum for me to help m understand the calculations you would have to do?

12202016, 02:56 PM

Member


Join Date: Nov 2014
Posts: 49
Thanks: 11
Thanked 0 Times in 0 Posts


Quote:
Originally Posted by tinstructor
Yes there is! The good news is, most of the work is already done once you've calculated the rise to the center of the elbows and the duct or pipe between them.
>Total length=sqr(hypotenuse^2offset^2)+ 2x (elbow 1/2 rise)
>the hypot. is slant side of the triangle all the way to the center of the angle,without subtracting 2x the rise. You will already have calculated this. sqr is square root
>the rise to the center of the elbows also will already have been calculated and,of course,the offset is known.
I hope this is clear and helps you.

I think I understand now, does it work for all different angles e.g. 30 and 60 degrees??

12212016, 09:27 AM

Member


Join Date: Dec 2011
Location: midwest
Posts: 65
Thanks: 7
Thanked 12 Times in 9 Posts


..does this work for ALL degrees of elbow offsets ?
Yes,it does, and since its not possible to memorize all of the different trigonometry numbers, you should let your math calculator do the work.
> if you like I'll give you a mini tutorial on the trig keys on your calculator.
> sine,cosine,tangent,(sin, cos,tan)& their inverse functions are your friends.

12212016, 10:59 AM

Member


Join Date: Nov 2014
Posts: 49
Thanks: 11
Thanked 0 Times in 0 Posts


Quote:
Originally Posted by tinstructor
Yes,it does, and since its not possible to memorize all of the different trigonometry numbers, you should let your math calculator do the work.
> if you like I'll give you a mini tutorial on the trig keys on your calculator.
> sine,cosine,tangent,(sin, cos,tan)& their inverse functions are your friends.

That sounds great thanks for all the help

12232016, 11:18 PM

Junior Member


Join Date: Dec 2016
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts


GI Ducting
Hello everyone,
I am new in Hvac field.my boss said to me making BOQ for ducting. i already make but confuse in TDC & TDF & profile for duct. will you please explain me how can choose TDF,TDC & profile for ducting?

01052017, 09:34 AM

Member


Join Date: Nov 2014
Posts: 49
Thanks: 11
Thanked 0 Times in 0 Posts


Quote:
Originally Posted by tinstructor
Yes,it does, and since its not possible to memorize all of the different trigonometry numbers, you should let your math calculator do the work.
> if you like I'll give you a mini tutorial on the trig keys on your calculator.
> sine,cosine,tangent,(sin, cos,tan)& their inverse functions are your friends.

I'd like to take you up on your offer if that's ok when you get a chance mate. Thank you very much

01122017, 07:55 PM

Junior Member


Join Date: Jan 2017
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts


30 or 60 degree elbow
for 30 or 60 degree elbows do you still use ".414 x CLR" or is there a different number other than .414 ?

01122017, 08:55 PM

Member


Join Date: Dec 2011
Location: midwest
Posts: 65
Thanks: 7
Thanked 12 Times in 9 Posts


.414 multiplier for all angles of offsets ????
No. Each angle has its own unique rise.
> Do this; On your calculator,enter the degree of elbow that you are using. Divide it in half.Leave this answer on the screen and press the tangent(tan)key. This is your multiplier. Use just the first 3 digits to the right of the decimal.
>I hope this is clear and helps you.

Thread Tools 

Display Modes 
Linear Mode

Posting Rules

You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off



All times are GMT 6. The time now is 06:22 PM.
