The New Home for the Sheet Metal Industry Forums
SheetMetalTalk
 


Go Back   Sheetmetal Talk > Sheet Metal Forums > Sheet Metal Basics

Sheet Metal Basics Forum for those beginning sheet metal layout and other related fields. Let the industry help answer your questions. There's plenty of experienced help in our shop wanting to help you.


Share This Forum!  
 
 
     

 

Reply
 
Thread Tools Display Modes
  #1  
Old 05-24-2014, 08:59 AM
mrblint mrblint is offline
Junior Member
 
Join Date: May 2014
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default having a cone frustum fabricated

I have a very small, much too cramped one-car-garage wood shop, and need better dust collection than my shopvac with a mini dust deputy provides. But it has to be compact. Budget is limited.

I have a "shorty" tower design in mind, where the blower sits on top of a steel cone. Since I have no experience fabricating metal, I have no idea whether it would be reasonable to expect a metal shop to make me a few pieces that I could put together myself, for about $250, using 1/8" thick steel. I could weld the seams myself if they were made accurately.

What I'm looking for is a large cylinder (14" I.D.) with bolting flanges, and a cone frustum (larger I.D. 14", smaller I.D. 6", 14" tall) also with flanges, and a small cylinder, 6" I.D. with a flange. Something like the attached picture but without the complication of the inlet.
Attached Thumbnails
CycloneShapes.png  
Reply With Quote
  #2  
Old 05-26-2014, 02:13 AM
Bud's Avatar
Bud Bud is offline
ME
 
Join Date: May 2003
Location: Waukesha
Posts: 2,101
Thanks: 415
Thanked 125 Times in 88 Posts
Default

Welcome to the forum... not too sure what a fab shop would charge but I'm pretty sure the using 1/8" thick steel is not necessary for what you're wanting.

If you're not comfortable with what a local fab shop is bidding on your project, try asking for three local bids to see if they are all in the same price range.
Reply With Quote
  #3  
Old 05-27-2014, 07:07 AM
mrblint mrblint is offline
Junior Member
 
Join Date: May 2014
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Thanks for the reply.

I can get quotes from a few shops. But I didn't want to waste their time if making cones is difficult and this was going to cost $500 minimum.

When I was thinking about what thickness, I had in mind that the cone might have to bear the weight of the motor and impeller. Do you think a sixteenth would be plenty strong?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


 

All times are GMT -6. The time now is 04:19 AM.


Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.