Sheetmetal Talk

Sheetmetal Talk (http://www.sheetmetaltalk.com/index.php)
-   A Tinners Porch (http://www.sheetmetaltalk.com/forumdisplay.php?f=4)
-   -   Something different I made (http://www.sheetmetaltalk.com/showthread.php?t=2786)

Stickman 10-15-2017 08:04 AM

Something different I made
 
1 Attachment(s)
Hey, hopefully everyone here is so busy to post anymore and not all gone. I do realize we are a dying breed, but I'm not dead yet. A had a request to build this letter "M" I used cold roll because she wanted to use the rust patina solution. This will be mounted on the wall and all her grandchildren pictures will go inside it. I am still looking for the finished pic she sent me, but I wanted to get the pot stirred here.

Hope all are doing well and keep bending away !! :D

Bud 10-15-2017 08:31 AM

Very nice. Thanks for sharing.

Bud 10-15-2017 08:46 AM

Quote:

Hey, hopefully everyone here is so busy to post anymore and not all gone.
Not sure where some went and why others just are interested in reading the content that has been created over many years. I'm hoping to put more time into this throughout the colder months.

I have a couple of ideas of what I really want to do this winter and I think it will be a good thing for TheSheetMetalShop site.

Thanks for stopping in and contributing - it's always welcomed.

Joeysmith 10-17-2017 06:00 PM

Nice work. I try to remember to check in from time to time.

ncscribe 11-12-2017 10:43 PM

Nice job!! Life has gotten to me for a while. Not away from sheet metal though. Replacing some fiber duct with real steel. Hated that stuff when it first came out, and nothing has changed......

Stickman 12-21-2017 01:05 PM

Nothing really changed
 
In a way it really hasn't :)

https://www.youtube.com/watch?v=vreETksRxHo

Joeysmith 12-21-2017 07:58 PM

1 Attachment(s)
Nothing fancy but a change from duct building.

ncscribe 12-29-2017 11:56 PM

I can say I've not been on much because of life. Although I did get to do some ductwork last month. Maybe I should replace the word get with had. Had some straps break on the fiberduct at the house. Got to break out my slightly rusty ductwork skills ad put up 12' of trunk and a 14x14 to 24x8 hand made transition. I will confess that the transition was built on my tailgate in the driveway, and those Dewalt hammer drills run in self tappers at lightening speed. (With the hammer function NOT on). Also have a tinsmith project or two to do here soon. If I can find time. LOL


All times are GMT -6. The time now is 03:55 AM.

Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.