Sheetmetal Talk

Sheetmetal Talk (http://www.sheetmetaltalk.com/index.php)
-   Canadian Red Seal Exam (http://www.sheetmetaltalk.com/forumdisplay.php?f=39)
-   -   Canadian Red Seal (http://www.sheetmetaltalk.com/showthread.php?t=749)

tinman9765 04-29-2006 10:56 PM

Canadian Red Seal
 
Just wanted to have a little input on the Canadian inter-provincial red seal exam. Has any Canadian tin-basher taken in the last 5 years, and if so, what was your general thought on the exam ? I know that when I took it, I do not feel like I was prepared by my instructors, but still passed, and got the seal.

Tets11 04-30-2006 02:34 AM

I'm taking mine next week. I feel prepared but I guess well have to wait and see if I am actually prepared.

MadNinja 04-30-2006 04:47 PM

Does anyone have any questions from the exam that I can use to study from? I can write the test in about a month and a half.
I heard there were a lot of math questions and it's quite hard. Any help would be appreciated.

tinman9765 04-30-2006 11:28 PM

yes there is a lot of math, lots of blue print reading, pattern dfevelopement, pattern developement = 15 questions,(ships ventilator comes to mind, such as each gore is a seperate parralal development, 6 questions on welding and hoisting, 9 on welding processes, 17 on prepar. of sheet metal products, 24 on fabric & assem of ducts, (one question that comes to mind is a hood sizing, and the formula for the added allowence is on spec) 36 questions on install vent and airconditioning and 5 questions on servicing. know how to read blueprints, and look up specs on blueprints. Know sin cos and tangent functions, that would help out. there was a wrapper formula for an ogee ofset i had never seen before the test, 120 questions in total, just be prepared to be there for the whole time, don't panic, and a molson canadian tastes great after the test in the local school bar, so does 2, 3, 4,............. there are some question that come t mind, but I think it's better that I not confuse before the exam, if this helps let me know. like I said, biggest thing I found was there was a lot of fliping through the book for specs and blueprints.

Tets11 04-30-2006 11:34 PM

Thanks a million! I really appreciate it. If you think of anything else, let me know. Thanks again

tinman9765 04-30-2006 11:44 PM

http://www.thesheetmetalshop.com/mod...ay-pid-32.html

Tets11 04-30-2006 11:59 PM

Hey Tinman, how long ago did you write for your Red Seal???

tinman9765 05-01-2006 07:01 AM

apr 7 2006

Tets11 05-01-2006 02:49 PM

I'm writing May 5 2006

tinman9765 05-03-2006 10:46 PM

good luck hope you do well


All times are GMT -6. The time now is 02:16 PM.

Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.